Loading ...
Loading ...
Loading ...
WINDSHIELD DEFROSTING AND DEFOGGING
WARNING
n
Windshield heating
Do
not use the
or position
during cooling operation in extreme‐
ly humid weather. The difference be‐
tween the temperature of the out‐
side air and that of the windshield
could cause the outer surface of the
windshield to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the
position and fan speed control knob
or button to the lower speed.
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set the
mode to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window,
outside rear view mirrors, and all side
windows.
• Clear all snow and ice from the hood
and air inlet in the cowl grille to im‐
prove heater and defroster efficiency
and to reduce the probability of fog‐
ging up inside of the windshield.
To defog inside windshield
1. Set the fan speed to the desired
position.
2. Select desired temperature.
3. Press the defrost button ( ).
4. The air conditioning will be turned
on according to the detected ambi‐
ent temperature and outside
(fresh) air position will be selected
automatically.
If the air conditioning and outside
(fresh) air position are not selected au‐
tomatically, adjust the corresponding
button manually. If the
position is
selected, lower fan speed is adjusted to
a higher fan speed.
To defrost outside windshield
1. Set the fan speed to the highest
position.
Features of your vehicle
4-132
Loading ...
Loading ...
Loading ...