User Manual - Page 394

For 2018 KIA QUORIS.

Loading ...
Loading ...
Loading ...
Inspect the hose routing to assure that
the hoses do not come in contact with
any heat source, sharp edges or mov‐
ing component which might cause heat
damage or mechanical wear. Inspect all
hose connections, such as clamps and
couplings, to make sure they are se‐
cure, and that no leaks are present. Ho‐
ses should be replaced immediately if
there is any evidence of deterioration
or damage.
Air cleaner filter
Have the air cleaner filter replaced by a
professional
workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Spark plugs
Make sure to install new spark plugs of
the correct heat range.
WARNING
Do not disconnect and inspect spark
plugs when the engine is hot. You
may burn yourself.
Valve clearance (3.8 L)
Inspect excessive valve noise and/or
engine vibration and adjust if necessa‐
ry. In this case, have the system serv‐
iced by a professional workshop. Kia
recommends to visit an authorized Kia
dealer/service partner.
Cooling system
Check the cooling system parts, such as
radiator, coolant reservoir, hoses and
connections for leakage and damage.
Replace any damaged parts.
Coolant
The coolant should be changed at the
intervals specified in the maintenance
schedule.
Automatic transaxle fluid
An automatic transaxle fluid should not
be checked under normal usage condi‐
tions.
Have the automatic transmission fluid
changed by a professional workshop
according to the maintenance schedule.
Kia recommends to visit an authorized
Kia dealer/service partner.
NOTICE
An automatic transaxle fluid color is
basically red.
As the vehicle is driven, the auto‐
matic transaxle fluid will begin to
look darker.
It is normal condition and you should
not judge the need to replace the
fluid based upon the changed color.
CAUTION
The use of a non-specified fluid
could result in transaxle malfunction
and failure.
Use only specified automatic trans‐
axle fluid. (Refer to 󳱷Recommended
lubricants and capacities󳱸 on page
8-10.)
Brake hoses and lines
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
Maintenance
7-28
Loading ...
Loading ...
Loading ...