Loading ...
Loading ...
Loading ...
Turn signals and lane change
signals
The Engine Start/Stop button must be
on for the turn signals to function. To
turn on the turn signals, move the lever
up or down (A). The green arrow indica‐
tors on the instrument panel indicate
which turn signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues to
flash after a turn, manually return the
lever to the OFF position.
To signal a lane change, move the turn
signal lever slightly and hold it in posi‐
tion (B). The lever will return to the OFF
position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
One-touch turn signal
To activate an one-touch turn signal
move the turn signal lever slightly and
then release it. The lane change signals
will blink 3, 5 or 7 times.
You can set the number of operating
times. Refer to LCD display on page
4-56.
NOTICE
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec‐
tion in the circuit.
Front fog light
Fog lights are used to provide improved
visibility when visibility is poor due to
fog, rain or snow, etc.
1. Turn on the park light.
2. Turn the light switch (1) to the
front fog light position.
3. To turn off the front fog light, turn
the light switch to the front fog
light position again or turn off the
park light.
4-109
4
Features of your vehicle
Loading ...
Loading ...
Loading ...