Loading ...
Loading ...
Loading ...
(Continued)
and the engine turned on again, a
message
"Headlamp beam pattern
set to opposite side range has been
reduced" will appear. It is to notify
the driver the function is activated.
Lighting control
The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at
the end of the control lever to one of
the following positions:
1. OFF position
2. Auto light / AFLS position
3. Parking light position
4. Headlight position
Auto light/AFLS position
When the light switch is in the AUTO
light position, the taillights and head‐
lights will be turned ON or OFF auto‐
matically depending on the amount of
light outside the vehicle.
If your vehicle is equipped with the
adaptive front lighting system (AFLS),
it will also operate when the headlamp
is ON.
CAUTION
• Never place anything over the sen‐
sor (1) located on the instrument
panel, this will ensure better auto-
light system control.
• Don’t clean the sensor using a win‐
dow cleaner, the cleaner may leave
a light film which could interfere
with sensor operation.
• If your vehicle has window tint or
other types of coating on the front
windshield, the Auto light system
may not work properly.
Features of your vehicle
4-106
Loading ...
Loading ...
Loading ...