Loading ...
Loading ...
Loading ...
POWER STEERING FLUID
Checking the power steering
fluid level
With the vehicle on level ground, check
the fluid level in the power steering
reservoir periodically. The fluid should
be between MAX and MIN marks on the
side of the gauge at the normal tem‐
perature.
Before adding power steering fluid,
thoroughly clean the area around the
reservoir cap to prevent power steering
fluid contamination.
If the level is low, add fluid to the MAX
level.
NOTICE
Check that the fluid level is in the
"HOT" range on the gauge. If the flu‐
id is cold, check that it is in the
"COLD" range.
In the event the brake/clutch system
requires frequent additions of fluid,
have the system Inspected by a profes‐
sional workshop. Kia recommends to
visit an authorized Kia dealer/service
partner.
CAUTION
• To avoid damage to the power
steering pump, do not operate the
vehicle for prolonged periods with
a low power steering fluid level.
• Never start the engine when the
reservoir tank is empty.
• When adding fluid, be careful that
dirt does not get into the tank.
(Continued)
(Continued)
• Too little fluid can result in in‐
creased steering effort and/or
noise from the power steering
system.
• The use of the non-specified fluid
could reduce the effectiveness of
the power steering system and
cause damage to it.
Use only the specified power steering
fluid. (Refer to Recommended lubri‐
cants and capacities on page 8-10.)
Checking the power steering
hose
Check the connections for oil leaks,
damage and twists in the power steer‐
ing hose before driving.
Maintenance
7-36
Loading ...
Loading ...
Loading ...