Loading ...
Loading ...
Loading ...
Installing a child restraint system
by lap belt (on the center rear seat)
(if equipped)
To install a child restraint system on
the center rear seats, do the following:
1. Place the child restraint system on
the center rear seat.
2. Extend the latch plate tongue of
the lap belt.
3. Route the lap belt through the re‐
straint according to the seat manu‐
facturer’s instructions.
4. Buckle the seat belt and adjust the
lap belt for a snug hold on the child
restraint by pulling on the loose
end of the belt. After installation of
the child restraint system, try to
move it in all directions to be sure
the child restraint system is se‐
curely installed.
Installing a child restraint system
by lap/shoulder belt
To install a child restraint system on
the outboard or center rear seats, do
the following:
1. Place the child restraint system in
the seat and route the lap/shoulder
belt around or through the re‐
straint, following the restraint
manufacturer’s instructions. Be
sure the seat belt webbing is not
twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis‐
tinct click sound.
Position the release button so that it is
easy to access in case of an emergen‐
cy.
Safety features of your vehicle
3-36
Loading ...
Loading ...
Loading ...