Loading ...
Loading ...
Loading ...
Instruments, Controls, & Other Features
214
Information
Instruments, Controls, &
Other Features
Leaving the ignition switch in ON or ACC
with the engine stopped will drain the
battery.
Do not turn the ignition switch while riding.
Do not use the engine stop switch except in
an emergency. Doing so when riding will
cause the engine to suddenly turn off,
making riding unsafe.
If you stop the engine using the engine
stop switch, turn the ignition switch OFF.
Failing to do so will drain the battery.
The display locks at 999,999 when the
read-out exceeds 999,999.
The tripmeters return to 0.0 when each
read-out exceeds 9,999.9.
The owner’s manual, Navigation System
manual, registration and insurance
information can be stored in the left
saddlebag.
A banking (lean angle) sensor automatically
stops the engine and fuel pump if the
motorcycle falls over. To reset the sensor,
you must turn the ignition switch to OFF
and back to ON before the engine can be
restarted.
This model is equipped with a Throttle by
Wire System.
Do not put magnetized items or items
susceptible to magnetic interference near
the right handlebar switches.
The backlight brightness of the meter will
be controlled automatically when “AUTO”
is selected on the brightness setting.
Ambient brightness is detected by the
photosensor.
Do not damage or cover the photosensor.
Otherwise, the automatic brightness
control may not work properly.
Ignition Switch
Engine Stop Switch
Odometer
Tripmeter
Owner’s Manual
Ignition Cut-off System
Throttle by Wire System
Automatic Brightness Control
Photosensor
Loading ...
Loading ...
Loading ...