Loading ...
Loading ...
Loading ...
Engine Oil
u
Changing Clutch Oil Filter
161
Maintenance
Changing Clutch Oil Filter
Use a new Honda Genuine clutch oil filter
or equivalent specified for your model.
1.
Follow the steps 1- 6 of Changing
Engine Oil & Filter.
2 P. 159
2.
Place a drain pan under the clutch oil
filter cover.
3.
Remove the clutch oil filter cover,
spring and clutch oil filter by removing
the oil filter cover bolts.
u Discard the oil and clutch oil filter at
an approved recycling center.
4.
Install a new clutch oil filter with the
rubber seal facing in, toward the
engine. You will see “OUT-SIDE” mark
on the clutch oil filter body, toward the
filter cover.
5.
Replace the O-ring and apply a thin
coat of engine oil to new O-ring before
installing it.
6.
Install the spring and the clutch oil filter
cover.
7.
Install the clutch oil filter cover bolts
and tighten.
8.
Apply a thin coat of engine oil to the
rubber seal of a new engine oil filter.
2 P. 160
9.
Install the new engine oil filter and
tighten.
10.
Replace the sealing washers with new
ones. Install the drain bolts and tighten
them.
2 P. 159
11.
Fill the crankcase with the
recommended oil (
2 P. 148, 237, 239)
and install the oil fill cap.
12.
Check the oil level. (2 P. 158)
13.
Check that there are no oil leaks.
NOTICE
Using the wrong clutch oil filter can result in serious
damage to the transmission.
GL1800BD/D/DA
Oil filter cover/O-ringCover bolts
Clutch
oil filter
Spring
“OUT-SIDE”
Rubber seal
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m)
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m)
Required oil:
When changing oil, engine oil
filter & clutch oil filter:
4.9 US qt (4.6 liters)
Loading ...
Loading ...
Loading ...