Loading ...
Loading ...
Loading ...
179
Troubleshooting
Warning Indicators On or Flashing
Low Oil Pressure Indicator
If the low oil pressure indicator comes on,
pull safely to the side of the road and stop
the engine.
1.
Check the engine oil level, and add oil as
necessary. 2 P. 158
2.
Start the engine.
u Only continue riding if the low oil
pressure indicator goes off.
Rapid acceleration may momentarily cause
the low oil pressure indicator to come on,
especially if the oil is at or near the low
level.
If the low oil pressure indicator stays on
when the oil level is at the proper level, stop
the engine and contact your dealer.
If the engine oil level goes down rapidly,
your motorcycle may have a leak or another
serious problem. Have your motorcycle
inspected by your dealer.
PGM-FI (Programmed Fuel
Injection) Malfunction
Indicator Lamp (MIL)
If the indicator comes on while riding, you
may have a serious problem with the PGM-
FI system. Reduce speed and have your
motorcycle inspected by your dealer as
soon as possible.
Combined ABS Indicator
If the Combined ABS indicator operates in
one of the following ways, your brakes will
continue to work as a conventional system,
but without the Combined ABS function.
Reduce your speed and have your
motorcycle inspected by your dealer as
soon as possible.
● Indicator does not come on when the
ignition switch is turned ON
● Indicator does not go off at speeds above
3 mph (5 km/h)
● Indicator comes on or starts flashing
while riding
The combined ABS indicator may flash if:
● The front wheel leaves the ground for
1 second or more
● You turn the rear wheel while your
motorcycle is lifted off the ground.
This is normal but the Combined ABS is not
in operation. To activate the system again,
turn the ignition switch to OFF, and then to
ON again.
NOTICE
Continuing to ride with low oil pressure can cause
serious damage to the engine.
Loading ...
Loading ...
Loading ...