Loading ...
Loading ...
Loading ...
8
8
Read carefully and keep for future
reference.
This appliance is supplied with a
moulded three pin mains plug for your
safety and convenience, which may be
marked, and rated, 13 amps.
A 13 amp fuse is tted according to the
type of mains plug tted.
Should the fuse need to be replaced,
please ensure that the replacement
fuse has the correct rating for the
type of mains plug tted and that it is
approved by ASTA or BSI to BSI362.
Check for the ASTA mark or the BSI
mark on the body of the fuse.
Warning!
If the fuse cover is detachable,
never use the plug with the
cover omitted. A replacement
fuse cover can be purchased
from your local Panasonic
Dealer.
How to replace the fuse
Open the fuse
compartment with
a screwdriver and
replace the fuse.
If the tted moulded plug is
unsuitable for the socket outlet in
your home then the fuse should
be removed and the plug cut off
and disposed of safely and an
appropriate one tted. There is a
danger of severe electrical shock if
the cut off plug is inserted into any
13 amp socket.
If a new plug is to be tted, please
observe the wiring code as shown
below. If in any doubt, please consult
a qualied electrician (For U.K. Models
only).
Warning!
This appliance must be
earthed.
Important!
The wires in this mains lead
are coloured in accordance
with the following code:
Green-and-yellow: Earth.
Blue: Neutral. Brown: Live.
As the colours of the wire in the
mains lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green-
and-yellow must be connected to the
terminal in the plug which is marked
with the letter E or by the Earth symbol
or coloured green or green-and-
yellow.
The wire which is coloured blue must
be connected to the terminal in the
plug which is marked with the letter N
or coloured black.
The wire which is coloured brown
must be connected to the terminal in
the plug which is marked with the letter
L or coloured red.
When this oven is installed it should be
easy to isolate the appliance from the
electricity supply by pulling out the plug
or operating a circuit breaker.
Safety Instructions
Loading ...
Loading ...
Loading ...