Loading ...
Loading ...
Loading ...
4
2b.7 Press the ‘+’ or ‘-’ button to adjust the number.
Time: 24-hour system.
Select Comfort temperature from 15-25℃.
Temperature unit: ℃/℉.
2b.8 Press the button for 3 seconds or wait 10 seconds to save and
exit the week, time and heating temperature setting.
Daily Timer Heating
2b.9 The following heating periods have been preset, these can be
altered if desired:
06:00 until 08:00
17:00 until 22:00
2b.10 Press until shows at the upper right corner of the screen
to enter the daily timer heating mode.
2b.11 Hold the button for 6 seconds to enter the daily heating
setting.
A maximum of 3 timed heating periods can be set per day.
2b.12 Press ‘’ or ‘’ to choose hour or minute.
2b.13 Press ‘+’ or ‘-’ to set the number.
The minute increment / decrement by 15minutes per press.
2b.14 Hold the button for 3 seconds or wait for 10 seconds to save
and exit the heating time period setting.
2b.15 Check the timer setting. Press to check the daily timer mode.
2b.16 If the heating needs to be turned off, it will be necessary to go
back to the Normal Control Mode to it turn off.
When in Daily Timer Mode switching the appliance off with
the remote will stop the light output. The heat output will
continue according to the timer settings.
Adjusting the Set Temperature
2b.17 Press the ‘+’ or ‘-’ button to increase or decrease the temperature
on the basis of COMF temperature.
COMF means the actual temperature is the same as setting.
ECO means the actual temperature is 2℃ lower than the setting
temperature.
ECO- means 4℃ lower.
COMF+ means 2℃ higher.
COMF++ means 4℃ higher.
Adaptive start control
According to room temperature and set-pointed temperature, the
heater will automatically determine the appropriate time to heat to
ensure that it will reach the set-pointed temperature in the set time
(up to 45 minutes prior to the set time).
Flame Colour Adjustment
2b.18 Press button to enter the flame adjustment screen.
There are 3 flame colour options, indicated by the number shown
in Diagram.
There are 6 levels of brightness, including off. This is indicated by
the bar, with the blank bar indicating off, see Diagram.
Brightness
Level
Colour
Option
2b.19 Press the ‘’ or ‘’ button to cycle through the flame colour
options.
2b.20 Press the ‘+’ button to increase the flame brightness.
Press the ‘-’ button to decrease the flame brightness until off.
Fuel Bed Colour Adjustment
2b.21 Press to enter the fuel bed light adjustment screen.
There are 14 fuel bed colour options, indicated by the number
shown.
There are 6 levels of brightness, including off. This is indicated by
the bar, with the blank bar indicating off, see Diagram.
Brightness
Level
Colour
Option
2b.22 Press the ‘’ or ‘’ button to cycle through the fuel bed colour
options.
2b.23 Press the ‘+’ button to increase the fuel bed brightness.
Press the ‘-’ button to decrease the fuel bed brightness until off.
Normal Control Mode
2b.24 Normal Control Mode is the default setting.
Alternatively press button until the logo is shown at the
upper right corner of the screen, see Diagram.
User Instructions
English
Loading ...
Loading ...
Loading ...