Loading ...
Loading ...
Loading ...
3.
Set Filtering Mode.
Blocklist Mode
The added IP addresses are not allowed to access the device.
Allowlist Mode
The added IP addresses are allowed to access the device.
4.
Click Add, enter the IP address, and click Add.
Figure 8-1 Set IP Address Filtering
5.
Oponal: Edit, delete, or clear the added IP addresses.
6.
Click Save.
8.3 Enable User Lock
To raise the data security, you are recommended to lock the current IP address.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → Service .
2.
Check Enable User Lock.
3.
Click Save.
Result
When the mes you entered incorrect passwords have reached the limit, the current IP address
will be locked automacally.
8.4 Set SSH
To raise network security, disable SSH service. The conguraon is only used to debug the device
for the professionals.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → Service .
2.
Uncheck Enable SSH Service.
3.
Click Save.
Entrance and Exit Capture Camera User Manual
48
Loading ...
Loading ...
Loading ...