Hikvision DS-TMC407-EHCURVED BOOM POLE User Manual

Loading ...

Note

Some models do not support this funcon. The actual device prevails.

Set the relay funcon.

Note

The supported number of relays varies with dierent models. Relay 1 corresponds to the 1A and

1B of the terminal. Relay 2 corresponds to the 2A and 2B of the terminal.

Set the barrier gate operaon and alarm operaon for the temporary vehicles, vehicles in the

blocklist, and vehicles in the allowlist.

Check Upload via SDK to arm and upload the vehicle informaon to the arming terminal via

SDK.

If the device has been connected to the alarm device, check Upload via Alarm Host. When

the barrier gate is open, the alarm device will be triggered to alarm.

Oponal: You can click the corresponding buons to control the barrier gate remotely.

Note

The funcons of remote control of barrier gate vary with dierent models. The actual device

prevails.

Click Save.

4.2 Set LCD

When the device is connected with a LCD, or equipped with a LCD, set the LCD parameters.

Before You Start

If you want to play the media les, prepare the media les in the format of PNG, JPG, JPEG, BMP,

or MP4. Ensure the size of a single le is smaller than 512 M.

Steps

Go to Conguraon → Device Conguraon → Entrances and Exits → LCD Sengs .

Entrance and Exit Capture Camera User Manual

Loading ...

Hikvision DS-TMC407-EHCURVED BOOM POLE All-in-one E&E machine with capture unit, curved boom pole and LCD