Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/81891553-ds-tmc407-ehcurved-boom-pole/bg29.png)
5.2 Connect to Plaorm
5.2.1 Connect to ISUP Plaorm
ISUP (EHome) is a plaorm access protocol. The device can be remotely accessed via this plaorm.
Before You Start
●
Create the device ID on ISUP plaorm.
●
Ensure the device can communicate with the plaorm normally.
Steps
1.
Go to Conguraon → Device Conguraon → System Conguraon → ISUP .
Figure 5-2 Connect to ISUP Plaorm
2.
Check Enable.
3.
Select Protocol Version.
4.
Select Address Type.
5.
Enter Plaorm IP Address, Plaorm Port, and Camera No.
Note
The camera No. should be the same with the added one on the ISUP plaorm.
6.
Oponal: Enter Encrypon Key if you select v5.0.
7.
Click Save.
8.
Oponal: View Registraon Status.
What to do next
When the registraon status shows online, you can add or manage the device via the plaorm
soware. Refer to its corresponding manual for details.
Entrance and Exit Capture Camera User Manual
27
Loading ...
Loading ...
Loading ...