Hikvision DS-TMC407-EHCURVED BOOM POLE User Manual

Loading ...

Figure 3-8 Real-Time Picture

You can do the following operaons on this interface.

Select the arming mode. Level 1 Arming can only connect one client or web. The uploaded

pictures will not be stored in the storage card. The pictures in the storage card will be

uploaded to the level 1 arming. Level 2 Arming can connect three clients or webs. The

pictures will be uploaded to the client/web, and stored in the storage card. Disarming is to

cancel the alarm status or real-me picture.

Select the stream type. Main Stream is the HD stream, mainly used for record. Sub-Stream is

the SD stream, mainly used for network transmission to save the bandwidth. Third Stream,

independent from the main stream and sub-stream, is used for network transmission, and

you can set dierent resoluons and bit rates.

Click Capture to enable manual capture. The captured pictures will be saved in the set local

path. Or you can click Open Folder to view the pictures.

Click Record to enable manual record. The recorded videos will be saved in the set local path.

If the computer and the device support built-in audio or have connected to an audio device,

you can click

to start two-way audio between the device and the computer.

Note

Some models do not support two-way audio. The actual device prevails.

Click Measure Plate to measure the license plate pixel. Aer the measurement, click Disable.

Entrance and Exit Capture Camera User Manual

Loading ...

Hikvision DS-TMC407-EHCURVED BOOM POLE All-in-one E&E machine