Hikvision DS-TMC407-EHCURVED BOOM POLE User Manual

Loading ...

4.3 Set Serial Port

4.3.1 Set RS-485

Set RS-485 parameters if the device has been connected to a vehicle detector or other RS-485

devices.

Before You Start

The corresponding device has been connected via the RS-485 serial port.

Steps

Go to Conguraon → Device Conguraon → System Conguraon → Serial Ports .

Figure 4-4 Set RS-485

Set Baud Rate, Data Bit, Stop Bit, etc.

Note

The parameters should be same with those of the connected device.

Select Working Mode.

Applicaon Mode Trigger

Select it if the vehicle detector has been connected via the RS-485 serial port.

Transparent Transmission

Select it, and the network command can be transmied to RS-485 control command via the

RS-485 serial port.

LED Display

Select it when the LED display is connected to the device via RS-485 serial port.

Click Save.

4.3.2 Set RS-232

Set RS-232 parameters if you need to debug the device via RS-232 serial port, or peripheral devices

have been connected.

Before You Start

The corresponding device has been connected via the RS-232 serial port.

Entrance and Exit Capture Camera User Manual

Loading ...

Hikvision DS-TMC407-EHCURVED BOOM POLE All-in-one E&E machine with capture unit, curved boom pole and LCD