Loading ...
Loading ...
Loading ...
Interpret printer display codes
Table 8-7 Control-panel light patterns
Code on display State of the printer Action
Go/01 The printer is in manual-feed mode. Load the correct paper type and size for the print job in the input
tray, and then press
(the Resume button) to continue or
press
(the Cancel button) to cancel the current job.
Go/02 The printer is processing a manual duplex
job.
Load the pages into the input tray to print their second sides, and
then press
(the Resume button) to continue or press
(the Cancel button) to cancel the current job.
Go/03 The paper type or size loaded in the input
tray is dierent from the paper type or size
specied in the print job settings.
Load the paper type and size that matches the print job settings
into the input tray, or press
(the Resume button) to
continue with the currently loaded paper. Alternatively, you can
press
(the Cancel button) to cancel the current job.
Go/06
(Wireless only)
The printer has received a request to
connect to this printer using Wi-Fi Direct.
Press (the Resume button) to connect or press (the
Cancel button) to stop.
P2 An ID Copy job has been started.
When (the Open Lid light) blinks, open the lid and turn over
the identication card, close the lid, and then press (the
Resume button) to continue or press (the Cancel button) to
cancel the current job.
Er/01 The input tray is empty.
Load the input tray or press (the Cancel button) to cancel
the current job.
Er/02 The cartridge access door is open. Verify that the top cover is fully closed.
Er/03 The printer failed to pick a sheet of paper to
print.
Press (the Resume button) to retry or reload the paper and
print again.
Er/04 Paper jam in the input tray/printer base. Clear jam in the input tray area or at the base of the printer. After
clearing the paper, press
(the Resume button) to continue.
See
Clear paper jams.
Er/05 Paper jam in the toner cartridge area. Clear jam in the toner cartridge area. Close the door and your print
job should resume automatically. See Clear paper jams.
Er/06 Paper jam in the output tray area. Clear jam in the output tray area. After clearing the paper, press
(the Resume button) to continue. See Clear paper jams.
58 Chapter 8 Solve problems ENWW
Loading ...
Loading ...
Loading ...