Loading ...
Loading ...
Loading ...
AXIS P3354
Events
Events
The Axis product can be configured to perform actions when different events occur, for exa m ple , start a recording w he n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installe d applications to trigger the rule, see
Applications, on page 27
.
• Detectors
- Day/Night Mode — trigger the rule when the product switches between day mode (IR cut filter on) and night
mode (IR cut filter off). This can for example be used to control an external infrared (IR) light connected
to an output port.
- Motion Detection — trigger the rule when motion is detected , see
Motion Detection, on page 24
.
- Tampering — tr igge r the rule when tamp e ring is detected, see
Camera Tampering, on page 24
.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be used to s tart
recording to the SD card.
- Temperature — trigge r the rul e if the tempe ra ture falls outside or inside the operating range of the product. This
canforexamplebeusedtosendmaintenancenotifications.
• Input Signal
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 8
. This can for example be used to validate actions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due t
o a PTZ operation. This can for example be used
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view m oves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to u
pload images from the p reset position.
• Storage
- Available — trigge
r the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — tr igger the rule wh en the storage device is full . Under normal operation, the oldest recordings will be
overwritten to prevent the storage device from becom ing full.
- Locked — trigg er the rule if the storage device is locked (write protected).
• System
- System Initializing — trigger the rule wh en the product is being started. This ca n for examp le be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule period ically, see
Recurrences, o n page 30
. This can for example be used to
upload an image eve ry 5 minutes.
- Use Schedule — trigge r the rule according to the selected schedule , se e
Schedules, on page 30
.
28
Loading ...
Loading ...
Loading ...