Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
28
WWW.SIGLENT.COM
Enable the Channel
The oscilloscope provides 2/4 analog input channels and provides independent
vertical control system for each channel. As the vertical system setting methods of
every channel is the same, this chapter takes CH1 as an example to introduce the
setting method of the vertical system.
Connect a signal to the CH1 channel connector; and then press the
CH1 button in
the vertical control area (VERTICAL) at the front panel to enable CH1.
The channel setting menu is displayed at the bottom of the screen and the channel
label at the right side of the screen. The information displayed in the channel label
is related to the current channel setting.
After the channel is turned on, modify the parameters such as the vertical scale, the
horizontal time base and the trigger mode according to the input signal to make
the waveform display easy to observe and measure.
Note: to turn off the channel, press the channel button twice.
Loading ...
Loading ...
Loading ...