Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
157
WWW.SIGLENT.COM
2. Press the Next Page softkey to go to the second page of the Display function
menu.
3. Press the Intensity softkey; and then turn the Universal Knob to select the
desired value. The default value is 50%, and the range is from 0% to 100%.
Increasing the intensity lets you see the maximum amount of noise and
infrequently occurring events. Reducing the intensity can expose more detail in
complex signals as shown in the following figures.
Grid Brightness
Do the following steps to adjust the grid brightness:
1. Press the
Display button on the front panel to enter the DISPLAY function
menu.
2. Press the Next Page softkey to go to the second page of the Display function
menu.
3. Press the Graticule softkey; and then turn the Universal Knob to select the
desired value. The default value is 40%, and the range is from 0% to 100%.
Transparence
Transparence can be used to adjust the transparence of the message box of cursor,
measure, Pass/Fail and all pop-up menus to an appropriate value to observe the
date more conveniently.
Under Cursor or Measure or any other menu operation, if want to change the
transparence of the message box, do the following steps:
1. Press the
Display button on the front panel to enter the DISPLAY function
menu.
2. Press the Next Page softkey to go to the second page of the Display function
Note: Waveform intensity adjustment affects analog channel waveforms only
(not math waveforms, reference waveforms, digital waveforms, etc.).
Loading ...
Loading ...
Loading ...