Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
189
WWW.SIGLENT.COM
Figure 117 Built-in Arb Interface
Setting
Figure 118 AWG Setting Interface
Output Load
Press Utility→ NextPage4/4→ AWG → Setting→ Output Load to set High-Z or 50Ω.
Sync Output
Press Utility→ NextPage4/4→ AWG→ Setting→ Sync Output, the AWG provides Sync
output through the [Aux In/Out] connector on the rear panel. When the Sync Output
is on, the port can output a CMOS signal with the same frequency as basic
waveforms (except the Noise and DC), arbitrary waveforms, and modulated
waveforms (except external modulation).
OVP (Over Voltage Protection)
Loading ...
Loading ...
Loading ...