Loading ...
Loading ...
Loading ...
SDS1000X-E&SDS1000X-U User Manual
24
WWW.SIGLENT.COM
6. Trigger Delay Label
Indicate the trigger delay on the waveform.
7. Frequency Counter
Display the frequency value of the trigger channel.
8. Sampling Rate/ Memory Depth
Display the current sampling rate and memory depth. Sa means the current
sampling rate and Curr means the current memory depth.
9. Trigger Setup
Trigger Type: display the current trigger type. The trigger type names
display by the abbreviation when the name is too long to display.
Trigger source: display the currently trigger source. Different channels
display in different color.
Trigger condition: display the current trigger condition.
Trigger coupling: display the current trigger coupling. Available trigger
coupling mode: DC, AC, HF Reject, LF Reject.
Trigger level: display the current value of trigger level. Push the knob
to set the trigger to the 50% of the waveform amplitude automatically.
10. Channel Setup
Probe attenuation factor: display the current probe attenuation factor of
the channel. Available probe attenuation factors: 0.1X, 0.2X, 0.5X,
1X …properties 2000X, 5000X, 10000X.
Input impedance: display the current input impedance of the channel.
Input impedance that available: 1MΩ.
Channel coupling: display the current channel coupling of the channel.
Channel coupling that available: DC, AC, and GND.
Vertical Scale: display the current vertical scale of the channel. Turn
the Vertical Scale Knob to adjust the value.
11. Trigger Level Label
Display the position of trigger level, the color is the same to the trigger channel.
It can move from +4.5div to -4.5div of the screen center.
12. I/O status
Indicate that the USB Host is connected.
Indicate that the LAN port is connected.
Indicate that the LAN port is disconnected.
Indicate that the WLAN port is connected.
Indicate that the WLAN port is disconnected.
Loading ...
Loading ...
Loading ...