Loading ...
Loading ...
Loading ...
NOTE: When you click the ‘log clip’ button, Cintel Scanner applies the same project
settings to all clips in the batch, and uses the newest project settings at the time of
capture. You are advised to confirm the scanner settings before starting the
batch capture.
If ‘Enable 2 Pass HDR Scan’ is selected, the high intensity HDR scan uses the same sets of In and
Out points as the initial batch of scans.
For more information on batch capture workflows, see Chapter 24, “Ingesting From Tape.”
–
Snapshot: Capture a single frame with normal exposure and current scanner settings.
Once scanning, if DaVinci Resolve detects that your storage bandwidth is too low to capture at the
selected speed, the scan speed will automatically adjust to ensure the capture is successful. If you are
using the optional Audio and KeyKode Reader accessory, the audio sample rate will also be adjusted
to maintain your chosen audio quality.
Extracting Audio
If the film you’re scanning also contains an optical sound track, you can extract the audio in a separate
step. There is a standard image frame to audio frame offset of 26 frames for 16mm and21 frames for
35mm that DaVinci automatically aligns when extracting the audio. Select allof the clips that have an
optical sound track, then right-click one of the selected clips and choose ‘extract audio’. Resolve
analyzes the overlapping optical track area of each frame and automatically generates a matching
audio track, synchronized with the scanned imagesequence.
Each clip’s audio will be automatically extracted, embedded in the clip and saved to the same
directory the scanned frames have been written to. A small audio icon will appear on the corner of
your clip’s thumbnail so you know there is a corresponding audio file.
To make extraction easier, you can filter the clips in the media storage by name, resolution,
datemodified or by film clips only. Filtering your clips makes it easier for you to find and select
exactly what you need. You can also make a large selection and extract audio from multiple clips at
once by right clicking on your selection and choosing ‘extract audio…’ from the menu. During audio
extraction, an information box indicates the progress. You can click the ‘stop’ button any time to stop
the extraction.
You can filter the contents in the media storage to make it easier to manage them.
If the ‘timestamp prefix’ checkbox was deselected in the ‘capture info’ section when your clips were
scanned, and you want to have extracted audio automatically embedded in your clips, always
remember to extract audio from the clips inside the media pool.
Chapter 25Capturing From the Cintel Film Scanner 413
Loading ...
Loading ...
Loading ...