Loading ...
Loading ...
Loading ...
– Smooth: Changes the selected stroke or control point from a linear to a smooth curve.
– Linear: Changes the selected stroke or control point from a smooth curve to linear.
– Select All: Selects all the control points on the polyline.
– Keys: Shows or hides the control points along the polyline.
– Handles: Shows or hides the Bézier handles along the polyline.
– Shape: Places a reshape rectangle around the selected polyline control points. Using the reshape
rectangle, you can deform groups of polyline control points or entire shapes much easier than
modifying each point.
– Delete: Deletes the selected control point(s).
– Reduce: Opens a Freehand precision window that can be used to reduce the number of control
points on a polyline. This can make the paint stroke easier to modify, especially if it has been
created using the Draw tool.
– Publish: You can use the Publish menu to either publish control points or the path. Publishing is
a form of parameter linking. It makes the selected item available for use by other controls, or to
attach a control point to a tracker.
– Follow Points: Allows a selected point to follow the path of a published point. The point follows
the published point using an offset position.
– Roto Assist: Enable the Roto Assist button when you begin painting with the Polyline Stroke tool.
The polyline points snap to the closest edge as you click to add points to the shape. A cyan
outline indicates the points that have snapped to an edge. There are three main Roto Assist
options selectable through the drop-down menu:
– Multiple Points: When enabled, a single click on a high-contrast edge will add multiple points
to define the entire edge, instead of having to add each point individually. This is a one time
only click. The second click reverts to single point edge detection.
– Distance 8: Opens a dialog where you can set the pixel range within which searching for an
edge will take place.
– Reset: Used for resetting the snap attribute of all snapped points. After resetting, the points will
become unavailable for tracking.
Inspector
The Paint Controls tab
Chapter 111Paint Node 2178
Loading ...
Loading ...
Loading ...