Loading ...
Loading ...
Loading ...
– Pin/De-Pin: Selecting this tool lets you pin multiple control points by either clicking on them or by
clicking and dragging to draw over all the points you want to pin/de-pin.
– Pull Points: Selecting this tool lets you make adjustments by clicking anywhere on the warp grid,
even between points, to pull all neighboring control points towards where you clicked. This can be
used to reduce color contrast within a specific range of colors.
– Push Points: Selecting this tool lets you make adjustments by clicking anywhere on the warp grid,
even between points, to push all neighboring control points within a particular proximity away from
where you clicked. This can be used to increase color contrast within a specific range of colors.
Modifiers
Each of the Modifier buttons let you manipulate selections and selected control points on the warping
grid in different ways immediately upon clicking each button.
– Increase Falloff/Smooth Selection: If you’ve selected one or more control points, clicking this
button expands the selection to include all adjacent control points surrounding the selection.
– Decrease Falloff/Smooth Selection: If you’ve selected a group of control points, clicking this
button shrinks the selection by deselecting the outermost ring of selected control points, leaving
the inner control points selected.
– Invert Selection: Clicking this button selects all unselected control points, and de-selects all
selected control points. This is useful when you want to make separate color adjustments to both
specifically selected halves of the warping grid.
– Convert Selection to Pin: Clicking this button pins all currently selected control points.
– Select/Pin Column: If you have one or more control points selected, clicking this button expands
the selection to include all points on every column that have at least one selected point.
– Select/Pin Ring: If you have one or more control points selected, clicking this button expands
the selection to include all points on every ring around the center that have at least one
selected point.
– Select/Pin All, Deselect/Pin All: Clicking this button toggles the selected state of the entire
warping grid on or off.
– Reset Selection/Pins: If you have one or more control points selected, clicking this button resets
their position to the original default position in the warping grid, without de-selecting them.
Range
The Range control is a fast method of selecting multiple control points corresponding to a specific
range of colors.
– Range: A gradient shows the range of hues currently being presented in the warping grid.
Dragging the left and right handles of the Range control selection box lets you automatically
select all control points corresponding to the hues that appear within the selection box. This is a
fast way of selecting all points within a range of colors for uniform manipulation.
Auto Lock Controls
The Auto Lock controls enables DaVinci Resolve to automatically lock a border of control points
surrounding any control point you select and adjust, which makes highly-specific color adjustments
easier to accomplish.
– Auto Lock: Enables and disables this behavior.
– X Points Border: Lets you set how many points away from the control point you’re adjusting the
border of locked control points that restricts your adjustments is. How large an area this ends
up being depends on how many points you choose, and on the resolution of the warping grid.
At higher grid resolutions, the same points distance isolates a smaller region of color.
Chapter 132Color Warper 2640
Loading ...
Loading ...
Loading ...