Loading ...
Loading ...
Loading ...
Apollo Solo Manual Console Reference 126
HP
When set to HP, the headphone output source is the dedicated HP cue mix, summed
with all DAW outputs that are routed to the HP outputs (if applicable).
In this mode, the mix of the HP cue bus is determined by the cue send controls in the
input channel strips and the aux return strips.
Console’s main monitor mix faders, mutes, and solos are not reflected in the headphone
output when HP is selected, because Console’s HP cue sends are always pre-fader.
Note: When HP is the selected cue source, signals must be sent to the HP cue
mix bus (via the HP cue sends) for the signal(s) to be heard in the headphone
outputs.
Cue Output Mono
This switch sums the left and right channels of the selected stereo source bus into a
monophonic signal. The headphone output is stereo when the switch is gray, and mono
when it is lit.
Tip: This switch only controls the headphone output. To hear the HP cue mix
in mono when it is routed to the monitor outputs (via the Control Room Source
switches), use the Monitor Mono switch instead.
Loading ...
Loading ...
Loading ...