Loading ...
Loading ...
Loading ...
Apollo Solo Manual Console Reference 119
Aux Return Strips
Both of Console’s aux return strips are identical. Most of the
controls have identical functionality as their equivalent control
in the channel input strips.
Refer to the diagram at right for descriptions in this section.
Aux Inserts
The aux inserts are operated using the same methods as
the insert controls in the channel input strips. See Console
Plug-In Inserts for complete descriptions of the aux insert
controls.
Important: UAD plug-in processing in the aux inserts is
always routed to the DAW (if the aux buses are routed as
DAW inputs), regardless of the Insert Effects setting (aux
insert processing is always recorded).
Aux HP Cue Send
The aux returns can be routed to the HP cue mix bus using
the cue sends on the aux returns. There is no cue pan control
on the aux returns, because the aux returns are stereo.
To send an aux signal to the HP cue mix bus, increase the HP
knob in the aux return.
Note: When the HP Cue Source is set to HP in the CUE
OUTPUTS popover, the aux return must be sent to the HP
cue mix bus via this control for the aux to be heard in the
cue mix.
Aux Pre
When the PRE switch is engaged (lit), the aux mix bus is pre-
fader and pre-mute. In PRE mode, the input channel faders
and mutes do not affect the aux bus.
Tip: Pre-fader mode is useful for configuring a mix bus that
is independent of the monitor mix controls (for example,
when creating a HP cue mix).
Aux Post
Post-fader is the default setting for Aux 1 and Aux 2. When the POST switch is engaged
(lit), the aux mix bus is post-fader and post-mute. In POST mode, the channel faders
must be up and un-muted to be routed to the aux bus, and the aux send levels will
reflect channel fader changes.
Aux
Inserts
HP Cue
Send
Pre & Post
Switches
Level Fader
& Meter
Aux Name
& Color
Mono & Mute
Switches
Aux Return Strip
Loading ...
Loading ...
Loading ...