Loading ...
Loading ...
Loading ...
[Printer]
Level 1 Level 2 Level 3 Descriptions
Emulation
- - Set the printer emulation mode.
Quality
- - Select the print quality.
Print Options Font List HP LaserJet
Print a list of the machine’s internal fonts.
BR-Script 3
Test Print
- Print a test page.
2-sided 2-sided Print
- Turn 2-sided printing off or on and select flip on long
edge or short edge.
Single Image
- For a print job where the last page is a 1-sided image,
select the 1-sided Feed option to reduce printing time.
Auto Continue
- - Select this setting if you want the machine to clear paper
size errors, and to use the paper in the tray.
Output Color
- - Set the output color.
Tray Command
- - Select this setting if a tray mismatch appears when you
use the HP drivers.
Reset Printer
- - Restore the printer settings to the factory settings.
Clr Correction Calibration Calibrate
Initiate color calibration to check and correct colors.
Reset
Reset the calibration parameters to the default settings.
Registration
- Align the print position of each color.
Auto Correct
- Set the machine to perform Color Calibration and
Registration automatically.
Color Settings Setting Mode
Select whether to apply the color print settings of the
machine or the printer driver.
Color Mode
Select the color mode.
Improve Gray
Turn on or off to improve the image quality of shaded
areas.
Enhance Black
Turn on or off if a black graphic does not print correctly.
Brightness
Adjust the brightness.
Contrast
Adjust the contrast.
Red
Adjust the red color.
Green
Adjust the green color.
Blue
Adjust the blue color.
[Network]
For wired and wireless network models
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP Boot Method
- Select the Boot method that best suits your
needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
(Up to 32 characters)
WINS Config
- Select the WINS configuration mode.
611
Loading ...
Loading ...
Loading ...