Loading ...
Loading ...
Loading ...
7
USER’S MANUAL /
6
PRE IN - DIGITAL IN:
• PRE IN. ANALOG (RCA) low level input
IN1 - IN2 - IN3 - IN4 - IN5 - IN6
The cable is provided to connect the preamplified signal outputs from the analog Master source with RCA connectors.
Through the software it will be possible to specialize the inputs by assigning the desired input
(see section. 7.5.4 - 7.5.5 - 8.2.2)
.
Input sensitivity adjustable from 0,8 to 6 V RMS
• DIGITAL IN. S/PDIF digital input
S/PDIF-IN
The cable is provided to connect the signal from your source with digital output via a specific coaxial cable for digital
signals with RCA connection. S8 DSP accepts PCM signals at its input with a maximum sampling frequency up to
96 kHz 24 bit, therefore it is not possible to reproduce DOLBY DIGITAL (AC3) encoded multichannel signals from
audio/video sources (such as the audio of a film in DVD) or DTS.
OUTPUT Low level analog signal (4 Volt RMS).
Ch1 - Ch2 - Ch3 - Ch4 - Ch5 - Ch6 - Ch7 - Ch8
The cable is provided to be connected to the RCA cables going to the system amplifiers.
5
4
IN 6
IN 5
IN 4
IN 3
IN 2
IN 1
S/PDIF-IN
200 mm / 7.87 in.
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
Blue
Blue/Black
Brown
Brown/Black
Orange
Orange/Nero
WIRE SIZE 20 AWG
6 mm
0.23 in.
REAR VIEW
OUT 8 -
OUT 6 -
OUT 4 -
OUT 2 -
OUT 8 +
OUT 6 +
OUT 4 +
OUT 2 +
OUT 7 -
OUT 5 -
OUT 3 -
OUT 1 -
OUT 7 +
OUT 5 +
OUT 3 +
OUT 1 +
WIRE SIZE 20 AWG
200 mm / 7.87 in.
6 mm
0.23 in.
OUT 8
OUT 4
OUT 6
OUT 2
OUT 7
OUT 3
OUT 5
OUT 1
REAR VIEW
IN 6 -
IN 4 -
IN 2 -
IN 6 +
IN 4 +
IN 2 +
IN 5 -
IN 3 -
IN 1 -
S/PDIF + S/PDIF -
IN 5 +
IN 3 +
IN 1 +
Loading ...
Loading ...
Loading ...