Loading ...
Loading ...
Loading ...
36
USER’S MANUAL /
How Input Sensitivity Setup looks like in RCA mode
Input clipping indicator. When the LED lights up,
it signals the presence of clipping on the
selected input.
By operating on one of the sliders, it will be
possible to adjust the sensitivity of each input.
Indicator of the sensitivity level of each
individual input channel, referred to the
position of the slider indicated above.
By clicking on the buttons it will be possible
to select a group of S8 DSP inputs for which
it will be possible to adjust the sensitivity
levels at the same time. Click the button
again to disable the function.
Select all: by clicking on the “Select all”
button it will be possible to adjust all the
sensitivity levels of the inputs of the S8 DSP
simultaneously. By clicking again on the
“Select All” button it will be possible to
disable the function.
Input sensitivity level calibration:
• With track 1 in progress, gradually decrease or increase the sensitivity of the first input used until the LED
turns on or flashes red, then you have to go back one step (the LED turns off)
• Carry out the same operation for the other inputs used.
- press Next to continue with the configuration.
- press Back to go back to the previous window.
- press Cancel to cancel the operation
.
3
4
5
2
1
7.5.7 INPUTS EQ SETUP (ANALOG INPUTS EQUALIZER)
The S8 DSP software provides an input equalizer, which can be managed by a maximum of 7 parametric equalization
bands per channel, this operation is useful for correcting the outputs of OEM HU sources when they are equalized.
-
Press Back to go back to the previous window.
-
Press NEXT to access the inputs equalization.
-
Press SKIP to skip the inputs equalization procedure.
7
3
4
5
2
1
Loading ...
Loading ...
Loading ...