Loading ...
Loading ...
Loading ...
37
USER’S MANUAL /
Volume: by operating on the “Volume” slider, you can make adjustments to the overall system output level
(-60 ÷ 0 dB).
Mute: by clicking on the “Mute” button it is possible to mute the output channels.
Click the “Mute” button again to disable the function.
Input Channel: by clicking on the drop-down menu, you can select the input channel you intend to equalize.
In order to display the set equalization curve more clearly, using the slider it is possible to increase or
decrease the vertical scale (dB).
This part of the screen indicates the frequency (HZ) of each intervention pole of the equalization referred to
the position of the “Fo” slider.
By clicking on the buttons it is possible to select a group of equalization poles to which the Gain levels can be
adjusted at the same time. By clicking on the button again, the function will be disabled.
Select all: by clicking on the “Select all” button it will be possible to adjust all the Gain levels of the equalization
poles at the same time. By clicking on the “Select all” button again, the function will be disabled.
Flat: by clicking on the Flat button, the Gains of all poles will be returned to the 0 dB position.
EQ Link: when active, it applies the equalization curve of the left channel to the right channel or vice versa.
EQ off: by clicking on the EQ off button, the equalizer on the selected channel or 2 channels (EQ Link active)
selected is deactivated to check the effect without losing the settings. By clicking on the “EQ off” button again,
the function will be disabled.
G (dB): by operating on the “G” slider, it will be possible to make adjustments to the gain of the selected pole
(Gmin +12dB ÷ Gmax -12dB).
Fo (Hz): by operating on the “Fo” slider, it will be possible to make adjustments to the frequency of the selected pole.
Q: by operating on the “Q” slider, it will be possible to make adjustments to the “Q” quality factor of the
selected pole (Q: 1 ÷ 15 step min 0.1).
This part of the screen displays the values of G (dB), Fo (Hz), Q set for each equalization pole.
- Press BACK to go back to the previous window.
- Press NEXT to perform the inputs equalization.
- Press SKIP to skip the inputs equalization.
Remarks: A finer adjustment of these parameters can also be made using the keyboard of your PC / MAC
TAB key
: allows you to select the slider, “G” “Fo” and “Q” for each equalization pole.
The successful selection is visible through the orange color of the adjustment slider.
Keys and : allow fine adjustment of the selected slider.
WARNING: if you proceed with the inputs equalization, S8 DSP will enable the audio outputs, the general volume will
be set by default to -42dB to avoid damaging the speakers when starting calibration.
11 12 13
3
4
14
5
6
2
7
8
9
10
1
1
9
5
13
3
11
7
2
10
6
14
4
12
8
7
Loading ...
Loading ...
Loading ...