Loading ...
Loading ...
Loading ...
18
USER’S MANUAL /
7. S8 DSP SET UP WITH PC/MAC
To adjust the S8 DSP functions a software is required. The processor needs to be connected to the PC/MC and turned on.
After installing the software, start it by selecting the icon shown on your desktop.
The first window is the startup page where one of the following modes needs to be selected:
- CONNECT - USB, connects the S8 DSP to the PC/MAC via USB;
- CONNECT - BT, allows the connection in bluetooth mode with the PC/MAC (if available);
- OFFLINE, demo mode.
In this case even if the S8 DSP processor is connected to the PC/MAC, it does not interact with the software. The OFFLINE
mode can be used to work on the software to get familiar with the processor multiple functions without connecting
the S8 DSP to the PC/MAC and it is possible to open a saved setup*.s8c or simulate three different configurations:
motorcycle, car, free placement. For the specific functions
(see section 7.5.1)
- Select Create new setup to start the software in demo mode.
- Select Open a saved setup to start the software with a saved setup.
- Select BACK to go back to the start window.
1
2
7.1 OFFLINE MODE
7
Loading ...
Loading ...
Loading ...