Loading ...
Loading ...
Loading ...
(48,1)
44 Safety — seats, seat belts and supplemental restraint system
Be sure to follow the manufacturer’s instructions
for the proper use of your child restraint. Follow
these steps to install a rear-facing child restraint
on the rear seats using three-point type seat belt
without automatic locking mode:
1. Position the child restraint on the seat
.
MSSS0654A
Rear-facing: Step 2
2. Route the seat belt tongue through the child
restraint and insert it into the buckle
until
you hear and feel the latch engage.
3. To prevent slack in the seat belt webbing, it is
necessary to secure the seat belt in place with
locking devices attached to the child restraint.
MSSS0639A
Rear-facing: Step 4
4. Remove any additional slack from the seat
belt; press downward
and rearward
firmly in the centre of the child restraint with
your hand to compress the vehicle seat
cushion and seatback while pulling up on the
seat belt.
MSSS0658A
Rear-facing: Step 5
5. Test the child restraint before you place the
child in it
. Push the child restraint from side
to side and tug it forward to make sure that it
is held securely in place.
6. Check to make sure that the child restraint is
properly secured prior to each use. If the child
restraint is loose, repeat steps 3 through 5.
Loading ...
Loading ...
Loading ...