Loading ...
Loading ...
Loading ...
(323,1)
When passing another vehicle:
MWBF0178X
The driver can override ICC by depressing the
accelerator pedal. The set speed indicator
will
flash when the vehicle speed exceeds the set
speed. The vehicle detect indicator will turn off
when the area ahead of the vehicle is open. When
the pedal is released, the vehicle will return to the
previously set speed.
Even though your vehicle speed is set in the ICC
system, you can depress the accelerator pedal
when it is necessary to accelerate your vehicle
rapidly.
How to switch the ICC system off
MEVT33A1-48552384-F829-407C-8B86-31A4047F91D6
Switch off the ICC system completely by turning
the Cruise ON/OFF switch off. The ICC indicators
will go out.
How to change the set vehicle speed
MEVT33A1-81DFB76B-3B1A-4BEA-A894-1153CBB8D90D
To cancel the preset speed, use any of these
methods:
* Push the <CANCEL> switch. The set vehicle
speed indicator and the cruise indicator will
turn grey.
* Tap the brake pedal. The set vehicle speed
indicator and the cruise indicator will turn
grey.
* Turn the Cruise ON/OFF switch off. The ICC
indicators will go out.
To reset at a faster cruising speed, use one of the
following methods:
* Depress the accelerator pedal. When the
vehicle attains the desired speed, push and
release the <SET-> switch.
* Push and hold the <RES+> switch. The set
vehicle speed will increase in increments of 10
km/h or 5 MPH.
* Push, then quickly release the <RES+> switch.
Each time you do this, the set speed will
increase by approximately 1 km/h (1 MPH).
To reset at a slower cruising speed, use one of
the following methods:
* Lightly tap the brake pedal. When the vehicle
attains the desired speed, push the <SET->
switch and release it.
* Push and hold the <SET-> switch. The set
vehicle speed will decrease in increments of 10
km/h or 5 MPH.
* Push, then quickly release the <SET-> switch.
Each time you do this, the set speed will
decrease by approximately 1 km/h (1 MPH).
To resume the preset speed, push and release
the <RES+> switch. The vehicle will resume the last
set cruising speed when the vehicle speed is over
30km/h (20 MPH).
How to change the set distance to the vehicle ahead
MEVT33A1-17DBF70F-4DF6-4B13-8C83-32389A15AA53
MWAF1188X
The distance to the vehicle ahead can be selected
at the time of the ICC standby or the ICC is active.
Each time the DISTANCE switch
is pushed, the
set distance will change to long, middle, short and
back to long again in that sequence.
Starting and driving 319
Loading ...
Loading ...
Loading ...