Loading ...
Loading ...
Loading ...
(193,1)
MWAE0465X
3. Slowly reverse the vehicle adjusting the steer-
ing wheel so that the predictive course lines
enter the parking space .
4. Manoeuvre the steering wheel to make the
vehicle width guide lines
parallel to the
parking space
while referring to the pre-
dictive course lines.
5. When the vehicle is parked in the space
completely, place the shift position in the "P"
(Park) position and apply the parking brake.
REAR VIEW MONITOR SETTINGS
MEVT33A1-54416AD3-192F-4BD6-9F2D-D870FB593E1B
To set up the rear view monitor, push the
<CAMERA> button while the shift lever is out of
the "R" (Reverse) position to display the Camera
Setting screen.
Available setting items:
* [Predictive course line]
Predictive course lines can be turned on/off.
* [Display setting]
The brightness, contrast, tint, colour and black
level can be adjusted.
NOTE:
Do not adjust any of the display settings of the
rear view monitor while the vehicle is moving.
Make sure the parking brake is firmly applied.
The predictive course lines can also be turned on
and off by pushing the <CAMERA> button while the
shift lever is in the "R" (Reverse) position.
REAR VIEW MONITOR SYSTEM LIMITA-
TIONS
MEVT33A1-EFFF2C63-07DF-4C45-BC34-87E0A099AC03
WARNING
Listed below are the system limitations for rear
view monitor. Failure to operate the vehicle in
accordance with these system limitations
could result in serious injury or death.
* The system cannot completely eliminate
blind spots and may not show every
object.
* Underneath the bumper and the corner
areas of the bumper cannot be viewed on
the rear view monitor because of its
monitoring range limitation. The system
will not show small objects below the
bumper, and may not show objects close
to the bumper or on the ground.
* Objects viewed in the rear view monitor
differ from actual distance because a
wide-angle lens is used.
* Objects in the rear view monitor will
appear visually opposite compared to
when viewed in the rear view and outside
rearview mirrors.
* Use the displayed lines as a reference. The
lines are highly affected by the number of
occupants, fuel level, vehicle position, road
conditions and road grade.
* Make sure that the back door is securely
closed when reversing.
* Do not put anything on the rear view
camera. The rear view camera is installed
above the number plate.
* When washing the vehicle with high-pres-
sure water, be sure not to spray it around
the camera. Otherwise, water may enter
the camera unit causing water condensa-
tion on the lens, a malfunction, fire or an
electric shock.
* Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunction
Monitor, heater, air conditioner, audio and phone systems 189
Loading ...
Loading ...
Loading ...