Loading ...
Loading ...
Loading ...
(167,1)
to a kicking motion, while carrying the Intelligent
Key with you, the back door will open or close
automatically.
Proper operation technique
* While at the rear of the vehicle, begin making a
quick forward kicking motion.
* Raise your foot straight under the centre of
the rear bumper then immediately return your
foot to the ground in a continuous motion.
* You do not need to hold your foot under the
bumper or move it side to side. Immediately
return your foot to the ground.
* The kicking motion should be straight, smooth
and consistent.
* After your kick motion is complete, step back
and allow the back door to open/close.
* Three beeps will sound and the back door will
begin moving within 2 seconds after the kick.
WARNING
Prevent unintentional back door opening/
closing. There may be conditions when open-
ing/closing the back door is not desired. Keep
the Intelligent Key out of range of the back
door, (2 m (7 ft) or more) or inside the vehicle,
when washing or working around the back of
the vehicle.
NOTE:
* The kick motion sensor may not function
under the following conditions:
— When operating near a location where
strong radio waves are transmitted, such
as a TV tower, power station or broad-
casting station.
— When the vehicle is parked near a parking
meter.
* The power back door may not operate when
your foot remains in the operating range
.
CAUTION
* When the Intelligent Key is carried with you
near the back door, even someone, who
does not carry the Intelligent Key, may be
able to open or close the back door with a
kick motion.
* Do not perform a kick motion near the
exhaust system components while they
are hot. You may severely burn yourself.
* Do not perform a kick motion on an
unstable place (for example, on a slope or
a muddy ground, etc.).
Power open or close function
MEVT33A1-94248880-4054-45A3-8FA5-C721B521EEE2
The back door will fully open automatically using
the kick motion sensor.
1. Carry the Intelligent Key.
2. Move your foot under and away from the rear
bumper similarly to a kicking motion within
the operation range of the kick motion sensor.
3. The back door will automatically open or close.
Stop and reverse function
MEVT33A1-765D1EB4-6DF0-44CA-A8A2-32368545D371
The power back door will stop immediately if a kick
motion is performed during power open or close.
The back door can be stopped even if you do not
carry the Intelligent Key.
And then the power back door will move in the
reverse direction if a kick motion is performed
again. The power back door can be reversed when
you carry the Intelligent Key.
GARAGE MODE SYSTEM (where fitted)
MEVT33A1-52632399-52A3-41DB-8244-C0725D0158B1
The back door can be set to open to a specific
height by performing the following:
1. Open the back door.
2. Pull the back door down to the desired
position and hold the back door (the back
door will have some resistance when being
manually adjusted).
3. While holding the back door in position, press
and hold the power back door close switch
located on the back door for approximately 3
seconds or until 2 beeps are heard.
The back door will open to the selected position
setting. To change the position of the back door,
repeat steps 1-3 for setting the position of the back
door.
CAUTION
Do not set the height of the back door below
approximately 1/3 of the way to the floor using
garage mode. Even if you set the height below
approximately 1/3 of the way to the floor, the
Pre-driving checks and adjustments 163
Loading ...
Loading ...
Loading ...