Loading ...
Loading ...
Loading ...
(348,1)
344 Starting and driving
System display and indicators:
MWAF1192X
Example
1. Detected speed limit indicator
Displays the currently detected speed limit. For
additional information, see “Traffic Sign Re-
cognition (TSR)” (P.271).
Applied speed limit indicator (green frame)
Indicates the detected speed limit can be
applied to the vehicle set speed.
2. Speed Limit Link indicator
Indicates the system operation.
“
” : Manual mode is activated and a new
speed limit (faster speed value) is indicated.
“
” : Manual mode is activated and a new
speed limit (lower speed value) is indicated.
Operating the system:
When the system detects a different speed limit,
the new speed value is indicated. The vehicle set
speed can be changed to the indicated speed limit
manually.
* To accept the newly indicated speed limit,
operate the <RES+> switch (in case of speed
limit up) or <SET-> switch (in case of speed
limit down).
* The Speed Limit Link indicator (
or )
will turn off after approximately 15 seconds if
the <RES+> or <SET-> switch is not operated.
(The Speed Limit Link indicator can be turned
off immediately by operating the opposite
switch from the direction indicated by the
Speed Limit Link indicator.)
The system will not activate if a speed limit change
is not detected.
How to activate or deactivate the system:
1. Push the
button on the steering
wheel until [Settings] appears in the vehicle
information display, and push the scroll dial.
2. Use the scroll dial to select [Driver Assistance].
Then push the scroll dial.
3. Select [Speed Limit Link] and push the scroll
dial to turn the system on or off.
NOTE:
The system will retain current settings in the
vehicle information display even if the engine is
restarted.
Selecting Speed Link Offset:
It is possible to set whether the speed limit should
be accepted exactly, or with a tolerance of –10
km/h (-5 MPH) to +10 km/h (+5 MPH).
1. Push the
button on the steering
wheel until [Settings] appears in the vehicle
information display, and push the scroll dial.
2. Use the scroll dial to select [Driver Assistance].
Then push the scroll dial.
3. Select [Speed Link Offset] and push the scroll
dial to select tolerance value. (Select [OFF] to
turn off the function.)
NOTE:
The function will retain current settings in the
vehicle information display even if the engine is
restarted.
Speed Limit Link - a feature of ProPILOT
Assist with Navi-link (where fitted)
MEVT33A1-577E6A91-C43C-498D-A98B-E19B7D169040
WARNING
Listed below are the system limitations for the
Speed Limit Link. Failure to operate the vehicle
in accordance with these system limitations
could result in serious injury or death:
* It is the driver’s responsibility to select the
proper speed, follow all traffic regulations
and observe other road users.
* The Speed Limit Link may not operate
properly and the actual speed limit may
not be applied to the vehicle set speed in
all conditions. The driver must manually
control the vehicle speed.
Below are some examples:
— When the Traffic Sign Recognition
(TSR) system is not functioning prop-
erly or turned off. (See “Traffic Sign
Recognition (TSR)” (P.271).)
Loading ...
Loading ...
Loading ...