Loading ...
Loading ...
Loading ...
(421,1)
GLASS
MEVT33A1-A5BB1415-C2AF-4945-AD84-E53DD87C2807
Use glass cleaner to remove smoke and dust film
from the glass surfaces. It is normal for glass to
become coated with a film after the vehicle is
parked in the hot sun. Glass cleaner and a soft
cloth will easily remove this film.
UNDERBODY
MEVT33A1-85F11A62-81BC-4A90-8F5E-E26104177B9F
In areas where road salt is used in the winter, it is
necessary to clean the vehicle’s underbody reg-
ularly in order to prevent dirt and salt from building
up and causing the acceleration of corrosion on
the underbody and suspension.
Before the winter and again in the spring, the
underseal must be checked and, if necessary, re-
treated.
WHEELS
MEVT33A1-47721BC4-4E82-4C10-9EF9-8999944FF913
* Wash the wheels when washing the vehicle to
maintain their appearance.
* Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
* Do not use abrasive cleaners when washing
the wheels.
* Inspect wheel rims regularly for dents or
corrosion. This may cause loss of pressure or
damage the tyre bead.
* NISSAN recommends that the road wheels be
waxed to protect against road salt in areas
where it is used during winter.
ALUMINIUM ALLOY WHEELS
MEVT33A1-57FE2E28-91F0-4A3F-B0B0-34395A817574
Wash the wheels regularly with a sponge dam-
pened in a mild soap solution, especially during
winter in areas where road salt is used. The salt
residue from road salt could discolor the wheels if
it is not washed off regularly.
CAUTION
Follow the directions below to avoid staining
or discoloring the wheels:
* Do not use a cleaner that uses strong acid
or alkali contents to clean the wheels.
* Do not apply wheel cleaners to the wheels
when they are hot. The wheel temperature
should be the same as ambient tempera-
ture.
* Rinse the wheel to completely remove the
cleaner within 15 minutes after the cleaner
is applied.
CHROME PARTS
MEVT33A1-174885A1-F19D-42A3-8822-22357FD4D865
Clean all chrome parts regularly with a nonabra-
sive chrome polish to maintain the finish.
MEVT33A1-2D22F4A7-9931-41A5-87D2-F42BD2240FAC
Occasionally remove loose dust from the interior
trim, plastic parts and seats using a vacuum
cleaner or soft bristled brush. Wipe the vinyl and
leather surfaces with a clean, soft cloth dampened
in mild soap solution, then wipe clean with a dry,
soft cloth.
Regular care and cleaning is required in order to
maintain the appearance of the leather.
Before using any fabric protector, read the man-
ufacturer’s recommendations. Some fabric protec-
tors contain chemicals that may stain or bleach
the seat material.
Use a soft cloth dampened only with water to
clean the meter and gauge lens covers.
WARNING
Do not use water or acidic cleaners (hot steam
cleaners) on the seat. This can damage the
seat or occupant classification sensors. This
can also affect the operation of the air bag
system and result in serious personal injury.
CAUTION
* Never use benzine, thinner or any similar
material.
* Small dirt particles can be abrasive and
damaging to leather surfaces and should
be removed promptly. Do not use saddle
soap, car waxes, polishes, oils, cleaning
fluids, solvents, detergents or ammonia-
based cleaners as they damage the leather
natural finish.
* Never use fabric protectors unless recom-
mended by the manufacturer.
Appearance and care 417
CLEANING INTERIOR
CLEANING INTERIOR
Loading ...
Loading ...
Loading ...