Loading ...
Loading ...
Loading ...
(166,1)
162 Pre-driving checks and adjustments
Stop and reverse function (where fitted)
MEVT33A1-32C0255D-5C8B-4CEB-8EBB-80B59DDCF3FC
The power back door will stop immediately if one
of the following actions is performed during power
open or close.
* pushing the power back door switch
* pushing the back door opener switch
* pushing the power back door close switch
on the lower part of the back door
* pushing the power back door button
on the
key
And then the power back door will move in the
reverse direction if one of the above actions is
performed again.
The outside chime sounds when the back door
starts to reverse.
Auto reverse function
MEVT33A1-C9AA93A1-CBF3-4EA4-AD9B-6CFC13236886
The auto-reverse function enables the back door
to automatically reverse when something is
caught in the back door as it is opening or closing.
When the control unit detects an obstacle, the
back door will reverse and stop.
If a second obstacle is detected, the back door
motion will stop.
A pinch sensor is mounted on each side of the
back door. If an obstacle is detected by the pinch
sensor during power close, the back door will
reverse and stop.
NOTE:
If the pinch sensor is damaged or removed, the
power close function will not operate.
WARNING
There is a small distance immediately before
the closed position that cannot be detected.
Make sure that all passengers keep their
hands, etc., clear from the back door opening
before closing the back door.
Manual mode
MEVT33A1-7EB39826-6304-4883-8641-FCB1271BF5C1
If power operation is not available, the back door
can be operated manually. Power operation may
not be available if the battery voltage is low or if
the back door is open approximately 150 mm (5.9
in) or less from the fully closed position. When the
power back door is turned off, the back door can
be opened manually by pushing the back door
opener switch. If the power back door opener
switch is pushed during power open or close, the
power operation will be cancelled and the back
door can be operated manually. This will allow
normal power operation functions to resume.
MOTION-ACTIVATED BACK DOOR
(where fitted)
MEVT33A1-87A9726B-668E-457D-9749-EC329ADB0E46
MWAD0154X
MJVP0487X
The back door can be operated using a quick
kicking motion under the centre of the rear
bumper.
The kick motion sensor
is located on the back of
the rear bumper. when you move your foot under
and then away from the operating range
similar
Loading ...
Loading ...
Loading ...