Loading ...
Loading ...
Loading ...
ASSEMBLY
ASSEMBLING STEEL LEGS
From among the loose parts, find the following
Hardware:
24 Truss Head Screws, 1/4-20 x 5/8 in. long (top
of screw is rounded)
24 Lockwashers, 1/4 in. External Type (approx.
dia. of hole 1/4 in.)
24 Hex nuts, 1/4-20 (approx. dia. of hole 1/4 in.)
8 Hex Nuts, 1/2-13 (approx. dia. of hole 1/2 in.)
4 Leveling feet.
Assemble the legs as shown...
1. Insert the Truss Head Screws through the holes
in the legs, then through the holes in the
stiffeners. MAKE SURE THE SCREWS GO
THROUGH THE HOLES IN THE SIDE
STIFFENERS MARKED "X".
2. Install the Iockwashers ... screw on the nuts
but do not tighten until completely assembled.
3. Install leveling feet.
END
STIFFENER '
ASSEMBLE SCREWS
THROUGH HOLES
MARKED "X"
SIDE STIFFENER
IN. HEX NUTS
_)F LEVELING FOOT
MOUNTING SAW
1. From among the loose parts, find the following
hardware:
4 Hex Head Screws, 5/16-18 x 1-1/4 in. long.
4 Hex Nuts, 5/16-18 (approx. dia. of hole 5/16
in.)
4 Lockwashers, 5/16 in. External Type (approx.
dia. of hole, 5/16 in.)
8 Flat Washers, (dia. of hole 11/32 in.)
NOTE: Do not lift saw by plastic housing.
/
8
Loading ...
Loading ...
Loading ...