Loading ...
Loading ...
Loading ...
FeedtheworkpiecebyhandalongtheAUXILIARY
FENCEuntiltheendisapprox.1in.pastthefront
edgeofthetable.ContinuetofeedusingthePUSH
BLOCK.
HoldtheworkpieceinpositionandinstallthePUSH
BLOCKby sliding it on top of the AUXILIARY
FENCE/WORKSUPPORT(ThisMayRaiseGuard).
NarrowstripsthickerthantheAuxiliaryFence/Work
Supportmayentertheguardandstrikethebaffle.
CAREFULLYraiseguardonlyenoughto clearthe
workpiece.UsePUSHBLOCKtocompletecut.
Inthisexamplea14"wideboardwillbecutdownthe
center.
Havesawcalibrated.Haveguardin position.
STEP1-Positiontheboardsotheusuablepiece
willbe7inchesbetweenthebladeandthe
fence.
STEP2-Adjustthefenceagainsttheboardsoitis
paralleltothesawblade.Lockthefencein
position.
STEP3-Turn MASTERswitch "ON" and press
key.Pressnumberkeys[_1 [_
[_,_ (decimal equivalent of 7/8
inches.) Press [_ key. The blade will
automatically raise to the programmed
height. Blade elevation will be displayed.
STEP 4- Firmly hold the board in cutting position.
Turn on the saw motor.
STEP 5-Guide the board through the blade.
Pushing only on the piece between blade
and the fence.
STEP 6- Turn the motor "OFF". Wait for the blade
to stop before removing the boards.
STEP 7- Press _ key. Press number key
. Press __t key. The blade
will
lower automatically until it is even with the
table.
WORKPIECE
I
"_"--'_ ,, !
'WTABLE
/ i
! , U ........
/
_ -:j F.,7 , --=---
37
Loading ...
Loading ...
Loading ...