Loading ...
Loading ...
Loading ...
104
It is possible to check the device information of the Eye-Fi card and the
status of Wireless communication.
Information to check:
Connected SSID
MAC address of the Eye
-Fi card
Firmware version of the Eye-Fi card
It is possible to check the information from [
Camera Settings] (P. 30) →
[Eye-Fi Settings] → [Connection Information].
CAUTION !!
The communication is interrupted if the camera is turned off during the
transfer. It resumes when the camera’s power is switched on again.
Please check that use of the Eye-Fi card is allowed in your country or
region. Please use it only if it complies with the laws in the country or
region.
In some cases, it is possible that the Eye-Fi card keeps sending radio
waves even when the function is set to [Off]. Please remove the card
from the camera when emitting the radio wave is strictly prohibited,
such as in hospitals or airplanes.
Depending on the wireless connection, the transferring process might
be slow or interrupted.
In case images are taken during image transferring, it may pause the
communication and transfer for a moment. Once the images are written
to the memory card, it continues the transfer process.
In case the image transfer does not operate well, please refer to the
instruction manual of the card, and check the settings of both of the card
and the computer.
The communication and transfer of the Eye-Fi card requires higher
consumption of the camera battery, so the battery will run out faster
than usual.
Loading ...
Loading ...
Loading ...