Loading ...
Loading ...
Loading ...
Setting the Time and Using the Timer
Setting the Current Time
MIEINU > System > Time > Clock
Set the clock manually or automatically.
To view the time after the clock is set, press the JNFO button on your remote.
The coc< must be reset every tree the power s d sconnected.
Setting the Clliook using II©igita_ Broadcast _nfo
ME:INU>System>Time>Clook>ClookMode
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
_f the ClfFookis Wrong in Auto Mode
MIEINU > System > Time > Clook > Time Offset
If the time the TV sets automatically is incorrect, you can offset the clock in 1-hour increments by as
much as -/+ 12 hours. Select System > Time > Clook > Time Offset, and then offset the clock to the
correct time.
Time Offset adjusts the tme through a network connection and is only ava abe f the Clock Mode s set to
Auto and the TV is connected to the Internet though a locaI area networlq
Time Offset adiusts the t me ftheTVfa storecevetme nformatonthroughnormaIdgta broadcast
s gnaIs_
Loading ...
Loading ...
Loading ...