Loading ...
Loading ...
Loading ...
Using Anynet+ (HDMi-CEC)
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's
remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with
the panel keys.
Thsfuncton snotava abeoncertan models n specific geographical areas,
Anynet+ cannot be used to control external devices that do not support HDMI-CEC,
Anynet+ devices must be connected to the TV using an HDMI cabb. Some HDMI cabes may not support
Anynet+ (HDMI-CEC), In ths case, you wi need to replace the HDMI cabe.
The TV remote contro may not function under certain circumstances, If this occurs, seect the Anynet+
device again,
Anynet+ (HDMI--CEC) only works wth externaJ devices that support HDMI-CEC and only when those
devices are either in standby mode or turned on_
Anynet+ (HDMI-CEC) can control up to 12 compatibe external dev ces (up to 3 of the same type), With
home theater systems, however:, the number of systems that can be controlled is lim ted to one,
To listen to 5,1-channel audio from an externa device, connect the device to the TV via an HDMI cabe and
the device's d gital audio output connector directly to the home theater system.
A home theater system that has been connected to the TV using an HDMI cable and an opt cal cabe
supports 2-channel audo only_ 5,1-channe audo s, however:, ava abe for dgta broadcasts with
5,l-channe audo,
Setting Up Anynet+ (HDMm-CEC}
MIE:INU > System ) Anynet+ (HDMJ-CEC}
- Anynet+ (HDM_-CEC)_:_
Enables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set to
On to enable all Anynet+ related features.
,, Auto Turn Off
When set to Yes, turns off Anynet + compatible external devices when the TV is turned off.
Some Anynet + compat[b e devices do _ot s_ pport this feat_ re
. Oev oese roh
Automatically search for and identify Anynet+ (HDMI-CEC) compatible external devices that are
connected to the TV.
Loading ...
Loading ...
Loading ...