Loading ...
Loading ...
Loading ...
82 | City Series CC40E-11
installation
920-074 02.28.19
Log 2 in position
Completed Install
6. Place Log 1 on the top of the installed rear log guides. Follow the
measurements as shown below.
7. Position Log 2 as shown and follow the measurements.
8. Place Log 3 to the right front corner of the burner. Follow the measure-
ments as shown. Make the edge of the log sit on top of the log guide.
11. Place Log 4—identify the pin locator and match with the left side
pin on Log 1. Rest the Log 4 on the indent in Log 2 as shown below.
12. Place Log 5—identify the pin locator and match with the right side
pin on Log 1. Rest the Log 5 on the indent in Log 3 as shown below.
10. Before placing the next log—spread the optional media evenly
throughout the burner tray as shown.
NOTE: Ensure the installed optional media doesn't completely block the
air flow—ensure more than 50% of the airflow is open (shown with 3/4"
crushed black glass).
9. Place Log 6 and Log 7 on the burner locations shown below.
Do not completely
block air flow
log guide
Log 3 Indent
2
CITY LINE
Loading ...
Loading ...
Loading ...