Loading ...
Loading ...
Loading ...
42 | City Series CC40E-11
installation
Optional Framing Kit Installation (Part # 656-953)
919-773a
01.21.19
CC40LE/CC40RE FRAMING KIT INSTALLATION
This framing kit is for the CC40LE/CC40RE. The parts are adaptable so
the same kit can be installed on either the right or left side units.
NOTE: CC40RE SHOWN IN DIAGRAMS
Installation is the same for CC40LE, please note that images will appear
fl ipped.
Unit nailing strips are not required and can be recycled when using the
framing kit.
2. Begin with the unit away from the wall. Install part A to the back of the
unit using holes next to appropriate shape (diamond or square depending
on which unit you have) using the diagrams below. Attach to the back
of the unit using 2 screws in locations shown below.
1. This framing kit requires the installation of two studs at locations shown
below. Be sure to install studs and walls to enclose chase (see Unit
Manual) prior to moving the unit into position.
Remove nailing fl anges
Shown for CC40RE
Measured from wall to stud center
CC40RE
Holes next to squares
CC40LE
Holes next to diamonds
A 656-391
B 656-392
2x C 656-393
D 656-396
E 656-394
F 656-398
G 656-397
H 656-395
J 656-399
K 656-400
18"
49 3/4"
Stud
Stud
A
NOTE: CC40LE use holes corresponding with diamond shape.
CC40RE use holes corresponding with square shape.
walls (ie. drywall)
1
CITY SERIES
To watch the framing kit installation video click here http://bit.ly/2qvHIsE
Loading ...
Loading ...
Loading ...