Loading ...
Loading ...
Loading ...
34 | City Series CC40E-11
installation
Framing Dimensions (Left Corner)
NOTE: Framing may be constructed of combustible material (ie. 2 x 4)and does not require steel studs.
Note: A combined minimum of
120 square inches of open area
is required for the convection air
outlet to cool the enclosure. En-
sure clearances for Convection Air
Outlets are met.
See clearances CC40LE/CC40RE
(single sided) in this manual as there
are different methods as to how this
can be achieved.
Framing
Dimensions
Description CC40LE
A Framing Height 37-3/8” (949mm)
B* Framing Width 48-1/4" (1226mm)
C* Framing Depth 19" (483mm)
D Unit Base to Top Enclosure (Min.) 63"(1600mm)
G Vent Centerline Height 56-1/4" (1429mm)
NOTE: Unit cannot be load-bearing. All finishing materials must be supported by the framing.
Note: This appliance must be in-
stalled on a level and solid surface
such as a plywood floor which must
be the full width and depth of the
appliance.
* The framing depth/width does not take into account dry wall/wood
or similar materials against the back /side wall. The framing depth
will need to change based on the thickness of the material
(example: B - 48 1/4" framing width +1/2" drywall = 48 3/4")
(example: C - 19" framing depth +1/2" drywall = 19 1/2")
*
*
Maximum material dimen-
sions 2" x 4" for wood
studs in front and side
studs behind can be either
2'' x 4'' or 2'' x 6''.
Note: Wood
header on
edge may be
2'' x 4'' or
2'' x 6''.
Loading ...
Loading ...
Loading ...