Loading ...
Loading ...
Loading ...
INSTALUNG SEPARATOR CHANNEL
WARNING: Separator channel must be properly
installed to help keep thin work from stipping
beneath the fence and heBp keep the fence raits
straight. Without the separator channel properly
in pnace,work could bind or kickback. You couM
be hit or cut.
1. From among the loose parts, find the:
4 Square Head Screws, 5/16-18 x 3/4" long
8 Hex Head Screws, 5/16-18 x 3/4" long
12 Flat Washers, 21/64" I.D.
12 External Lockwashers, 5/!6" I.D.
12 hex Nuts, 5/16-18
4 Brackets
1 Separator Channel
2. Install brackets to separator channel with 2 holes of
bracket facing channel. Use hex head screws - 5/16-
18" x 3/4" long through bracket hole and channel.
Install flat washer, Iockwasher and nut from inside
channel, Finger tighten eight nuts.
3. Slide square head screws into slot in bracket with
heads outside of brackets. Install flat washer, lock-
washer and nuts from inside of bracket. Finger tight-
en only leaving a gap between the inside of the
screw head and the outer face of the bracket.
4, Slide the square head screws into the slots from the
right end of the front and rear fence guide bars.
5/16-18 X 3/4
HEX HEAD SCREW
[ 11IIIIIiD
5/16-18 X 3/4 IN.
SQ. HD. SCREW
G G
5/16" EXTERNAL 21/64" WASHER 5/16" HEX NUT
LOCKWASHER
BRACK_
SEPARATOR CHANNEL
SEPARATOR CHANNEL
BRACKET
5/16-18X3/4"
HEX HD. SCREWS
NUT
SEPARATOR CHANNEL
5/16-18 X 3/4" _ -'-------- I--I_ LOCKWASHER
HEX HD. SCREWS _ I _ k'
F_rn_ II Ig{R _1 IF
_S:I!_A_N-: T BRACKET
BRACKE
FLAT WASHER
5/16-18 X 3/4"
SQ. HD. SCREW (1)
REAR FENCE
GUIDE BAR
SEPARATOR CHANNEL
/
FRONT FENCE GUIDE BAR
SQUAREHEAD
SCREWS
25
Loading ...
Loading ...
Loading ...