Loading ...
Loading ...
Loading ...
MOUNTING SAW TO LEG SET
I. From a_o_g the tcx_se pa_s, find the following hard
water
4 Hex Head Screws, 5/16..18 x t-I/4" long
4 Hex ,_quts,5/16.18
4 Lockwasher, 5/16 External Type
8 Flat Washers, !1/32 x t!/16 x 1/16
WARNING: The saw is heavy. To avoid back
injury, get help to lift the saw. Hold the saw close
to your body; Bend your knees so you can lift
with your legs, not your back.
PARTS SHOWN ACTUAL S_ZE
5/16-18 ;4 1-t/4 IN.
HEXHEAD SCREW
5/16 IN. EXTERNAL
LOCKWASHER
5/16-18
HEX NUT
FLATWASHER
2, Place saw or_ sawbase so that holes in bottom of
saw line up w_th holes in top of saw base.
3, Locate tt_e adapter plates and position them
between the _aw base and legset as illustrated.
Place, the mountin¢l bolts through the adapter plates
.saw houstng an(] legset as shown. Securely tigi_ten
a_ nuts. The adapter plates wi!t form the mounting
tr;_me for the chute.
BOLT HOLE
LOCATION
AT EACH OORNER
POSITION ADAPTER
PLATES ON TOP OF
LEG STIFFENER
LEFT
FRONT RIGHT
SIDE SIDE
LEG STIFFENER
o
POSITION
ADAPTER PLATES
ON TOP OF
LEG STIFFENER
_ADAPTER
PLATES
16
Loading ...
Loading ...
Loading ...