Loading ...
Loading ...
Loading ...
6. Holding the guide bar in place with one hand, insert
a flat washer, Iockwasher and nut on each screw
starting from the center and alternating left and right.
=inger tighten only until all six screws nave washers.
lockwashers and nuts installed. Hand tighten 4 nuts
at saw table first. With a straight edge along the right
side of the saw blade, align the blade aligning mark
on the top of the front rail with the right side of the
saw blade.
!
WARNING: Blade aligning marks must be aligned I
with blade. Misaligned rail could twist. Twisted
rail could misalign fence. A misaligned fence
could cause binding or kickback. You could be
hit or cuL
7. Adjust the extension table brackets against the back
of the guide bar and then finger tighten the nuts.
BLADE ALIGNING
MARK FRONT RAIL
TOP OF FRONT RAIL
RIGHT SIDE
OFSAW
BLADE
STRAIGHT
EDGE
.J
22
Loading ...
Loading ...
Loading ...